bokee.net

销售/贸易经理博客

正文 更多文章

The process of the silk tie

    Silk tie for Today's society is a relatively common men's clothing accessories, the process is how are we doing?
     Silk tie pattern design: silk tie pattern designer wear tie a variety of clothing, favorite flower, color, latest market popular season of different design able to meet its appreciation tie, scarf pattern . Silk tie pattern design should be noted that the number of flowers in color, attached together by hand platen printing, the general a tie pattern color should be less than 30, or hand-platen printing is difficult to print on demand printing effect; same pattern, designers can color a different color, according the color card GOLDLUCK or international standard color card color, and fill in the color table;
      Silk tie flowers and floral tantamount to the organization of the selection of raw materials (fabric) have a great relationship, and some flower-shaped suitable for satin printing blank, and some flower-shaped suitable for printing blank with jacquard (fabric pattern), flower design division according to market production of different fabrics used for this flower-shaped printing blank.
      Silk tie color: color colorist color should the color is issued by the designer or color table, and require the use of green printing material (Material selection of different chemical pigment), the choice of the corresponding color. pulp raw materials used for the printing division or proofing division, colorist technology is good or bad will affect the color effect and color speed, should be recorded for each suit, tie or scarf, colorist color recipe.
      1) the type of the color of its color fastness type;
      2) the type of the constituent material (silk, rayon, wool, etc.) using the chemical type pigment, color fastness will be different.
      Silk tie hand-scraping color proofing: proofing division colorist tuned slurry (to use the designer to specify the printing blank printing blank screen frame, because different printing blank on the moisture level of the same color and will there is a corresponding color) scraping excellent bar, color bar and then by steam box fixative.
      Silk tie examiner confirmed: the examiner Steamer proofing division scraping color bar test check and confirm (within the permissible error range).
     The silk tie Turn goods paste: color tie by scraping color production for the first time after the confirmation of the available colorist formulated selection of the appropriate chemical pigments to bring up the large cargo paste, otherwise it will be a waste of pigment.
     Steam box washed silk tie: Steamer washing printing fabric high temperature treatment in the steam box, color printed on the printing blank firmly taking in the fabric, the color fastness to strengthen, not easy to fade, washing go In addition to the slurry is not absorbed in the fabric.
      1) the different components of the fabric, the temperature requirements of the steam box, the Steamer time;
      2) different colors of different color fastness, steam oven temperature, such as red for color, thus requiring a slightly higher temperature than conventional color Steamer slightly longer time.
      3) color at high temperature steam box or less in conjunction with the steam box there are some differences, so require scraping color bar is also subject to the steam box washed.
      Silk tie fabric inspection: all of the fabric must be tested in the inspection process to mark the unqualified stamp of great color with the original request is not allowed to flow into the cutting workshop, you must re-enter the printing blank reprint such as only a small number of times point must be marked out for pick-chip Members convenience.
分享到:

上一篇:The evolution of t

下一篇:Tie originated

评论 (0条) 发表评论

抢沙发,第一个发表评论
验证码